As an Amazon Associate, I get commissions for purchases made through links in this post. No extra cost to you.
If you own a Dyson vacuum, you know that it’s a quality investment. But like any vacuum, it needs to be cleaned regularly in order to keep it working properly. Here is a step-by-step guide on how to clean it, so you can keep your home clean and your vacuum running smoothly.
Table of Contents
What You’ll Need
Assuming you have a Dysons vacuum, you will need the following materials:
– A soft brush attachment for your vacuum (optional)
– A can of compressed air
– A small flathead screwdriver
– A mild dish soap
– Lukewarm water
Step One: Empty the Dustbin
If your Dyson vacuum has a dustbin, the first step in cleaning it is to empty it. To do this, simply remove the dustbin from the vacuum and dump its contents into the trash. Be sure to do this over a trash can or other container to avoid making a mess.
In case your vacuum has a filter, you’ll need to clean that as well. To do this, remove the filter from the vacuum and rinse it off with water. Be sure to let the filter dry completely beforleaninge putting it back in the vacuum.
Step Two: Clean the Pre-Filter
The next step to cleaning your Dyson vacuum is to remove and clean the pre-filter. It is located under the bin, and can be accessed by removing the bin. Simply remove the filter and rinse it with water. If your vacuum has a HEPA filter, this will also need to be cleaned periodically.
Step Three: Wash the Post-Filter
Assuming you have already removed and washed the pre-filter, and the HEPA filter, it is now time to clean the post-filter. It can be found on the back of the bin assembly, and captures any remaining dust and debris before it enters the bin.
To clean the post-filter, first remove it from the vacuum by pressing the release button and sliding it out. Then, tap it gently on a hard surface to remove any loose debris. Finally, wash it in cool water with a mild detergent, being careful not to damage or bend the filter. Allow it to air dry completely before putting it back in place.
Step Four: Clean the Brushroll
If your Dyson vacuum has a brushroll, it’s important to clean it regularly to keep the vacuum running properly. Here’s how to do it:
- Remove the brushroll from the vacuum. This can be done by pressing a button or lever on the vacuum cleaner itself.
- Use a soft bristled brush to remove any debris and hair that is wrapped around the bristles of the brushroll. Be sure to remove any hair from the end caps as well.
- Once the brushroll is clear of debris, replace it back into the vacuum cleaner.
Step Five: Clean the Soleplate
In case your vacuum has a textile soleplate, start by removing any stuck-on dirt or debris. Use a soft brush to gently loosen anything that’s caked on. If you have a delicate floor, you may want to use a microfiber cloth instead of a brush.
Once the soleplate is clear of any visible dirt, it’s time to clean the plate itself. You can do this with a damp cloth and some mild soap. Be sure to rinse the plate well after cleaning, and dry it completely before using your vacuum again.
If your vacuum has a non-textile soleplate (such as ceramic), you’ll need to be a bit more careful when cleaning it. Avoid using any harsh chemicals or abrasive materials, as these could damage the plate. Instead, simply wipe it down with a damp cloth and mild soap. Rinse the plate well and dry it completely before using your vacuum again.
How to use a Dyson Vacuum
Most Dyson vacuums come with two power settings: an initial “boost” mode that provides maximum suction power for deep cleaning, and a lower setting for everyday upkeep. To engage the boost mode, simply press the button on the handle of the vacuum cleaner.
When using it on carpets, it’s important to move slowly and methodically so that the rotating brush can work its way deep into the fibers and loosen up all the dirt and debris. For best results, start in one corner of the room and make your way around in a systematic pattern.
On hardwood floors or other smooth surfaces, you can move a bit more quickly since there’s no need to worry about disturbing any trapped dirt. Be sure to pay extra attention to areas where there tends to be more foot traffic; these are usually prime spots for dirt and dust accumulation.
Finally, keep in mind that most Dyson vacuums come with attachments that can be used for cleaning upholstery or tight spaces. Be sure to consult your owner’s manual for more information on these and other features.
Pros and Cons of owning a Dyson Vacuum
When it comes to vacuuming, there are many different options on the market. One option is the Dyson vacuum. Their vacuums are known for being powerful and efficient. But, like anything, there are both pros and cons to owning it.
- Powerful suction – Dyson vacuums have some of the most powerful suction on the market. This means that they can easily pick up even the most stubborn dirt and debris.
- Great for allergies – Since Dyson vacuums have such strong suction, they can also be great for people with allergies. The strong suction will remove allergens from your carpets and floors, making your home a more comfortable place to be.
- Versatile – These vacuums are also very versatile. They can be used on both carpets and hard floors. And, they come with a variety of attachments that make them perfect for cleaning hard-to-reach areas like stairs and under furniture.
- Expensive – One downside of Dyson vacuums is that they can be quite expensive. If you are looking for a budget-friendly option, then a Dyson one might not be the best choice for you.
- Noisy – Another downside of Dyson vacuums is that they can be quite noisy. If you have sensitive hearing or live in an apartment where noise levels need to be kept down, then it might not be the best option for you.
We hope that this article has shown you how to clean a Dyson vacuum effectively. Regular cleaning will help to prolong its life and keep it working properly. Remember to follow the manufacturer’s instructions for best results.